Swept Protrusion in Creo Elements 1.0
Has anyone tried to create a swept protrusion in Creo 1.0. In Pro/E 5.0 you could select Sweep, Protrusion then sketch a closed trajectory. Once you create the trajectory you could use a open sketch...
View ArticleCreo 2 drawing dimension tolerance
I want to set the tolerances of individual dimensions on a drawing. I have the following two lines set in my config.pro: tol_display yestol_mode nominal Two items: 1. Creo doesn't like the "tol_mode...
View Articlecreo 2.0 M050 release date changed
Creo 2.0 M050 maintenace release date has changed to 26th april. PTC says..it has been changed to bring the best possiblle release...well that is good news.
View ArticleClik here to view.
Creo 2.0 M070 ?
What's wrong with this picture... Can I count on doing an update this weekend, PTC?
View ArticleDiameter dimension in Drawings
I'm having trouble turning a "created" dimension from a radius to a diameter in drawings. How do you do this in Pro E?
View ArticlePro/E Wildfire Mouse Button Settings
After using Pro/E 2001 for many years we've finally been given the ok by our management to upgrade to Wildfire. I just got all of the Wildfire software installed but I can't seem to get the mouse to do...
View ArticleCreating drafting 2D centerlines
It has been a while since I needed to create a drawing. A couple of features like a slot does not exhibit a centerline when you do a Show/Erase Axis command. I seem to recall there is a way to create...
View ArticleCreo 2.0 -How to create a drawing template(borders)??!!
Hi all, Can anyone tell me how to do this? I have blank sheets for all my drawings and no idea how to create metric templates. I cant see a clear way to do it. I'm new to creo, coming from a UG...
View Articlecreo 2.0 M050 release date changed
Creo 2.0 M050 maintenace release date has changed to 26th april. PTC says..it has been changed to bring the best possiblle release...well that is good news.
View ArticleHow to create an angled datum plane?
I am new to Pro E. How do you create datum planes at certain angles?
View ArticleSwept Protrusion in Creo Elements 1.0
Has anyone tried to create a swept protrusion in Creo 1.0. In Pro/E 5.0 you could select Sweep, Protrusion then sketch a closed trajectory. Once you create the trajectory you could use a open sketch...
View ArticleCreo 2.0 -How to create a drawing template(borders)??!!
Hi all, Can anyone tell me how to do this? I have blank sheets for all my drawings and no idea how to create metric templates. I cant see a clear way to do it. I'm new to creo, coming from a UG...
View ArticleCreo 2 drawing dimension tolerance
I want to set the tolerances of individual dimensions on a drawing. I have the following two lines set in my config.pro: tol_display yestol_mode nominal Two items: 1. Creo doesn't like the "tol_mode...
View ArticleBeginner Help
Hi, I am totally new to Creo software and my company has just purchased Creo Parametric. I have been on a basics training course and also have plenty of experience from other 3D packages. What I need...
View ArticleCreo 2 drawing dimension tolerance
I want to set the tolerances of individual dimensions on a drawing. I have the following two lines set in my config.pro: tol_display yestol_mode nominal Two items: 1. Creo doesn't like the "tol_mode...
View ArticlePro-E is driving me crazy
I've been using SDRC then NX for a long time and now my company wants to switch to Pro-E. I've been working on some of the tutorials. Can someone tell me how I can delete dimensions? I draw my sketch...
View ArticleDiameter dimension in Drawings
I'm having trouble turning a "created" dimension from a radius to a diameter in drawings. How do you do this in Pro E?
View ArticleDefault units in Creo 2.0
How can I change de default units in Creo. I tried to run the configure.bat, but it did not find the right files. Thanks
View ArticleSwept Protrusion in Creo Elements 1.0
Has anyone tried to create a swept protrusion in Creo 1.0. In Pro/E 5.0 you could select Sweep, Protrusion then sketch a closed trajectory. Once you create the trajectory you could use a open sketch...
View ArticleDiameter dimension in Drawings
I'm having trouble turning a "created" dimension from a radius to a diameter in drawings. How do you do this in Pro E?
View Article