Swept Protrusion in Creo Elements 1.0
Has anyone tried to create a swept protrusion in Creo 1.0. In Pro/E 5.0 you could select Sweep, Protrusion then sketch a closed trajectory. Once you create the trajectory you could use a open sketch...
View ArticleCreating a cross hatch pattern
I would like to create a cross hatch pattern like "concrete", "soil", or "wood". I sometimes need an irregular pattern for contractor drawings.
View ArticleRename part & drawing with dissimilar names
A quick search of the web tells me that this question has been asked many times before but none of the solutions I have found work for me and assume that the part and drawing are named the same. I am...
View ArticleHow do you save and keep Option settings in Creo?
I am a new user of Creo. There are some settings that I wish to save and keep, but I'm not sure how this should be done. In Environment Options there is a place to save Working Directory. I have...
View ArticleClik here to view.
Modeling a globoidal cam
Hi all,what I'm trying to do is the same cam you can see in this youtube video. I have the motion law I want to assign to the rotation of the tower in function of the rotation of the cam.In Mechanism...
View ArticleMechanica memory allocation vs actual usage
We've established here that setting Mechanica's memory allocation to around half your available memory is still a pretty good guideline, even though that's more likely to mean 6 GB than the 128 MB...
View Articleneed help with NOMENCLATURE
hi all, I am told by my colleagues that Pro-E can simply NOT manage a part naming system like the one I show below because there are letters and numbers in it, see the part numbered 100138 as follows:...
View ArticleSecret Cabling Techniques
I have heard of the functionality to control cabling through a word document outside of Pro/Engineer. Does anyone have any information on this that they would be able to share. We are currently routing...
View ArticleClik here to view.
Learning Connector issues (?)
Has anyone else been told by customer service that a script error in the Learning Connector is caused by Internet Explorer 9.0? Twice now, a Java update has causes errors with the online help part of...
View ArticleSwept Protrusion in Creo Elements 1.0
Has anyone tried to create a swept protrusion in Creo 1.0. In Pro/E 5.0 you could select Sweep, Protrusion then sketch a closed trajectory. Once you create the trajectory you could use a open sketch...
View ArticleIs it me or has PTC lost it's way
Have been a user of Pro-E (now CREO, for some unknown reason) since release 2001 and although, initially the program had new developments with subsequent releases, the later versions are a joke! The...
View ArticleMechanica memory allocation vs actual usage
We've established here that setting Mechanica's memory allocation to around half your available memory is still a pretty good guideline, even though that's more likely to mean 6 GB than the 128 MB...
View Articleneed help with NOMENCLATURE
hi all, I am told by my colleagues that Pro-E can simply NOT manage a part naming system like the one I show below because there are letters and numbers in it, see the part numbered 100138 as follows:...
View ArticleClik here to view.
Learning Connector issues (?)
Has anyone else been told by customer service that a script error in the Learning Connector is caused by Internet Explorer 9.0? Twice now, a Java update has causes errors with the online help part of...
View ArticleHow do you save and keep Option settings in Creo?
I am a new user of Creo. There are some settings that I wish to save and keep, but I'm not sure how this should be done. In Environment Options there is a place to save Working Directory. I have...
View ArticleLine weights and PDF files
I looked around for a solution but to no avail. Changing the config.pro pen_line_weight has no effect on my drawings. I tried using a pen table but did not get the results I was looking for. Using...
View ArticleClik here to view.
Showing same dimension in multiple views on drawing.
Hello! Is it possible to show same dimension in multiple views using the "show model anotations" command? I'm trying to make a table with dimensions from the model and when i put the dimension in the...
View ArticleMeasure Tool in Creo 2.0
Hi everyone... I know I've been absent quite a bit. I'm heavy into a very large design task and therefore I'm using Creo 2.0 very, very heavily. While I do prefer it to Wildfire 5... and even to...
View ArticleRename part & drawing with dissimilar names
A quick search of the web tells me that this question has been asked many times before but none of the solutions I have found work for me and assume that the part and drawing are named the same. I am...
View Article